HeatBoost Heat Pump Retro-Fit Radiators
Energy Saving
Lower Your Carbon Footprint
Easy Installation
HeatBoost Heat Pump Retro-Fit Radiators
Innovative Heating Solutions for Lower Energy Bills & Carbon Footprint
Energy Saving Product
Satisfaction
“The Radiator Solution That Is Saving Heat Pump Owners Hundreds If not Thousands On There Heating Bills”
Turn Down Your Boiler
45 - 50 DegreesTurn Down Your Boiler
Reduce your Gas Bill
and turn down your Boiler
to the most efficient operating temperatures
Turn Down your Heat Pump
As Low As 35 DegreesTurn Down your Heat Pump
Turn Down your Heat Pump
As Low As 35 Degrees
And Reduce Your Heat Pump Bills
Reduce Your Oil Consumption
Turn Your Heating Off QuickerReduce Your Oil Consumption
Reduce Your Oil Consumption and
Turn Your Heating Off Quicker
Helping To Reduce Your Oil Bills
“Simply Swap Out Your Old Radiators For HeatBoost Radiators, Turn Down Your Heat Pump, Enjoy Cheaper Heating”
HeatBoost radiators are the Harnitek fan coil radiators for both Domestic and Commercial heating. The stand out feature of these radiators are that they will work with a significantly lower water temperature than a traditional radiator. So in simple terms you can turn down your heat pump, or turn down your boiler. Clearly this will save you money! But there are many more reasons to look at the HeatBoost radiators.
These units have many additional advantages over standard radiators. In particular they have an integrated fan which allows for much greater air flow and therefore much faster performance. They are extremely light, only have 1 liter of water inside hence remarkable reaction speed. They only need 35 degrees water flow, they have only plastic and copper internal parts and so will not deteriorate or develop sludge and need flushing out. They use a very small amount of power to run the fan, they are quiet and have variable fan speed options. They are cold to the touch and so are safe as you cannot burn yourself on them. Lastly and importantly if they are hooked up to a heat pump they can work as cooling as well as heating, so in those crazy hot days you can cool your environment.
The units come in just 4 different sizes, as they are all fan assisted they are capable of covering a range of output requirements.
HeatBoost Radiator Overview Video
HeatBoost Prices
HeatBoost Radiators – Heat Pump Ready
HeatBoost Key Features
Combi Boiler Ready
The HeatBoost radiators can work with existing heating systems. They will generate a considerable amount of heat compared to your existing radiators.
The swap out, or retrofit of a HeatBoost is very simple, rarely requiring anything other the old radiator off the wall, and the new one on. The HeatBoost will require an electrical feed, this can easily bee spurred from an existing supply, or even a nearby plug socket.
The HeatBoost radiators will give out so much more heat that you may well decide to turn down the boiler – check with your boiler provider – meaning lower bills.
One or two strategically place HeatBoost radiators in your home can significantly boost your heating, meaning your house can reach temperature faster and the boiler turns off earlier. Clearly this will reduce the amount of Gas or electric your Combi boiler will consume.
The HeatBoost units have inbuilt fans to significantly increase the air rotation and therefore speed up heating the air in your home. Traditional radiators first have to heat the steel radiator, which then heats the air, the HeatBoost simple heats the air.
The heating and convection process is so efficient that the surface of the HeatBoost does not change, it remains at ambient room temperature, only the air in the space is heated. This is exceptionally efficient.
The HeatBoost radiators only have up to 1 litre of water internally, up to 10 times less than a steel radiator, so less water is required to be heated giving faster performance.
HeatBoost radiators are made with only copper and plastic internal components, meaning there is no degradation in performance, unlike steel radiators there is no sludge build up in the system.
HeatBoost radiators are fully individually programmable using a touchscreen LCD on each unit.
Heat Pump Ready
The HeatBoost radiators work extremely efficiently at only 35 degrees water temperature. For all heatpumps the lower the flow temperature the higher the efficiency of the system, therefore the lower the running costs – significantly lower.
The HeatBoost radiators only have up to 1 litre of water internally, up to 10 times less than a steel radiator, so less water is required to be heated giving faster performance.
The heat output is so great from the HeatBoost radiators that they remove much of the necessity to find large spaces for oversized steel radiators. One HeatBoost 550LM will supply the same heat output as 2 x K3 1400mm radiators. So less space and less installation time.
The HeatBoost radiators have LST (Low Surface Temperature) so are safe for many environments.
HeatBoost radiators are made with only copper and plastic internal components, meaning there is no degradation in performance, unlike steel radiators there is no sludge build up in the system.
Where the heatpump is capable the HeatBoost radiators can blow out cold air providing air conditioning in rooms as required. They are provided with condensate outflows if this is a required feature.
The electrical supply required for the HeatBoost radiators is tiny, from 20 – 40w of power only when the fan is running.
Oil Boiler Ready
For homes with oil boilers the disruption of changing to a low energy system is considerable. All radiators would generally need to be replaced with larger units, and this is often not possible.
Instead, as with the Combi boilers you could consider simply making your existing heating system much more efficient by installing the HeatBoost radiators. This will significantly boost the heat output in the rooms meaning the existing system will simply run considerably less, using less oil, reducing your oil bills and energy usage.
It is not necessary to change all your radiators, one or two strategically placed radiators may well have a significant effect on the amount of heat you are achieving.
Underfloor Heating Integration
The HeatBoost radiators work extremely efficiently at only 35 degrees water temperature. For all heatpumps the lower the flow temperature the higher the efficiency of the system, therefore the lower the running costs – significantly lower.
The HeatBoost radiators only have up to 1 litre of water internally, up to 10 times less than a steel radiator, so less water is required to be heated giving faster performance.
The heat output is so great from the HeatBoost radiators that they remove much of the necessity to find large spaces for oversized steel radiators. One HeatBoost 550LM will supply the same heat output as 2 x K3 1400mm radiators. So less space and less installation time.
The HeatBoost radiators have LST (Low Surface Temperature) so are safe for many environments.
HeatBoost radiators are made with only copper and plastic internal components, meaning there is no degradation in performance, unlike steel radiators there is no sludge build up in the system.
Where the heatpump is capable the HeatBoost radiators can blow out cold air providing air conditioning in rooms as required. They are provided with condensate outflows if this is a required feature.
The electrical supply required for the HeatBoost radiators is tiny, from 20 – 40w of power only when the fan is running.
